BFI Environment Products LTD

Components(1)

BFI Environment Products LTD

Showing 1 - 10 of 18, total 2 pages [First] [Previous] [Next] [Last]

valve 200aisi
Specification: Mecair 200 AISI
Detail: The 200 series in Stainless Steel is a range of diaphragm valve suitable for Dust collector applications. The 200 series valve has teh inlet port at 90°to teh outlet port. The range includes two models, which comprise...

linear diaphragm actuator
Specification: linear diaphragm cyslinders/acttuators
Detail: The linear air actuator have reduced weight and volume co***red to linear air cylinders of similar effeciency. Two models: double acting and single acting(with return spring). It is also available with the through rod ...

mini cleaning system
Specification: full immersion system
Detail: New mini designed for direct pneumatic injection into the filtering elements. The new 1/2" Full immersion valve has been designed for installation directly above the filtering element producing increased efficiency of ...

emission monitor
Specification: LKD,BBD5,EMP5,EMS6,EMP7
Detail: LKD,BBD5,EMP5,EMS6,EMP7 for more ***ails information, please contact us.

electronic controller
Specification: BUS,ETC1,TL06,LCT4,MTS,MT,MPS
Detail: Sequential timer outputs for up to air cannon relay output to activate rotary valve or screw conveyor Integral signal processing with level probes Manual activation of individual air cannon automatic activation of purge ai...

air cannon
Specification: CNN15,25,50
Detail: Air cannons to dislodge all types of dust which stick to the walls of the hopper and the bottom of the silos. these devices are more efficient than" fluidification" and "vibration" systems especially with particularly ...

explosion vent panels
Specification: Mecair vent panel
Detail: The explosion vent panels have been specifically developed and tested by Mecair for installation in dust collector filters. The main objective being to offer a solution to the market in accordance to the requirementts of the n...

bulkhead fittings
Specification: PTD/PTS
Detail: Bulkhead fittings connect the valve to the blow tube through the wall of the filter. An important saving of time and material is allowed by the quickness of the connection to an unthreaded blow tube with no need for welding or...

enclosure cxd
Specification: Mecair CXD
Detail: The CXD explosion proof solenoid enclosure is designed for those applications where the atmosphere may present the possibility of combustion. The CXD enclosure is explosion proof with the following grade of protection: EExd II...

enclosure csn
Specification: Mecair CSN
Detail: The CSN waterproof enclosure is designed for the piloting of diaphragm valves type VEM, and are available in the following models: -CSN5: from 1 to 5 solenoid pilots -CSN8: from 6 to 8 solenoid pilots -CSN12: from 9 to 12 s...


Showing 1 - 10 of 18, total 2 pages [First] [Previous] [Next] [Last]
1 2